• efficient compression-type hydrant
• factory-lubricated operating mechanism effectively o-ring sealed for long and efficient operation
• very low opening and closing torques
• automatic drainage
• positive sealing with o-rings at operating nut, operating housing, seat, optional bronze casing and seat
• durable and positive seating
• easy multiple positioning
• safety stem coupling and safety flange
• internal parts easily removed -- bury easily increased
• threaded hose and pumper nozzles -- simple replacement if needed
• interchangeability with previous D-67-M model hydrants
• conforms to AWWA specifications

• Hydrant shall be manufactured in accordance with AWWA Standard C502, and shall be listed with ULC and FM.
• Hydrant shall be designed for 175 p.s.i. working pressure and tested to 350 p.s.i. hydrostatic pressure.
• Hydrant shall be backed by manufacturer's 5 year limited warranty.
• Hydrant shall be a compression type, dry barrel design with centre operating stem construction.
• The o-ring seating surface on the upper operating stem shall be constructed of stainless steel.
• Hydrant lower operating rod shall be 1-1/4 inches in diameter.
• Hydrant shall have an internally lubricated bronze operating nut with o-ring seals. Operating nut shall be of the Hydra-lubeTM design to ensure self-lubrication during operation.
• Hydrant hose nozzles shall be mechanically locked into place by an external allen screw, and have o-ring seals.
• Epoxy coating to be applied to interior and exterior of hydrant shoe for corrosion protection.
• Hydrant shall be manufactured with poerating nut and integral thrust collar made of bronze. Delrin washer bearing shall be located above thrust collar for ease of hydrant operation.
• Hydrant shall have a lower valve assembly that fully encapsulates the lower operating rod threads. This allows for increased corrosion resistance and ease of disassembly.
• Hydrant shall have a main valve opening of 5 inches.
• Hydrant shall be a traffic model, complete with safety flanges and stem coupling. Nozzle section must rotate 360 degrees.
• Intermediate section shall be ductile iron.
• Hydrant shall be the Clow Canada Premier as manufactured by Clow Canada.

The Premier is available with monitor flange for use in industrial fire protection in pulp and paper mills, lumber yards or storage areas for inflammable materials. Tthe hydrant's 3" (76mm) flanged outlet is faced and drilled to ANSI 125, suitable for connecting a long radius flanged elbow and standpipe for mounting a monitor nozzle.

Previous D-67 and D-67-M models may be converted to incorporate important features of the Premier D-67-M -- easily and without excavation by using the operating nut conversion kit. Kit consists of: - two-piece stainless upper stem - Hydra-lubeTM operating nut - nut retainer gland and gasket - Delrin thrust bearing Specify D-67 kit (1-1/8" sq. stem) or D-67-M kit (1-1/4" sq. stem) All Premier D-67-M components are interchangeable with previous D-67-M models.

Clow's Premier D-67-M is equipped with a cast iron safety flange and grooved safety coupling. The safety flange is snap ring mounted onto a ductile iron intermediate section. If severe impact occurs, breakage will be at the safety flange and coupling. The hydrant body, working mechanism and intermediate section will remain undamaged.

The Premier is available with a complete line of integral 2-1/2" (65mm) and 4" (100mm) Storz quick connect couplings. The 2-1/2" coupling is bronze; the 4" is made type 316 stainless steel. Both come equipped with a cast iron cap. A complete line of retrofit stainless steel Storz couplings and adapters are available to convert existing D-67 and D-67-M hydrant models in most sizes. Some units are also available to retrofit different brands of discontinued hydrants.