 |
 |
|
| STECHNICAL INFO | ||
|
|
|
| STECHNICAL INFO | ||
ECCENTRIC PLUG VALVES
3"-12" ECCENTRIC PLUG VALVE PARTS LIST
14"-24" ECCENTRIC PLUG VALVE PARTS LIST
3"-24" ECCENTRIC PLUG VALVE WORM GEAR OPERATOR - PARTS LIST
3"-8" ECCENTRIC PLUG VALVE FLANGED ENDS - GENERAL DIMENSIONS
14"-24" ECCENTRIC PLUG VALVE FLANGED ENDS - GENERAL
DIMENSIONS
4"-24" ECCENTRIC PLUG VALVE FLANGED ENDS WITH WORM
GEAR - GENERAL DIMENSIONS
3"-8" ECCENTRIC PLUG VALVE SMJ ENDS - GENERAL DIMENSIONS
14"-24" ECCENTRIC PLUG VALVE SMJ ENDS - GENERAL
DIMENSIONS
4"-24" ECCENTRIC PLUG VALVE SMJ ENDS WITH WORM
GEAR - GENERAL DIMENSIONS
3"-8" ECCENTRIC PLUG VALVE GROOVED ENDS - GENERAL
DIMENSIONS
14"-16" ECCENTRIC PLUG VALVE GROOVED ENDS - GENERAL
DIMENSIONS
4"-16" ECCENTRIC PLUG VALVE GROOVED ENDS WITH WORM GEAR - GENERAL DIMENSIONS
ECCENTRIC PLUG VALVE MATERIALS AND SPECIFICATIONS
ECCENTRIC PLUG VALVE FEATURES AND BENEFITS
3"-24" ECCENTRIC PLUG VALVE OPERATING ACTION
ECCENTRIC PLUG VALVE FLOW DESIGNATED
ECCENTRIC PLUG VALVE CV VALUES
4"-24" ECCENTRIC PLUG VALVE WORM GEAR ACTUATOR
SELECTION CHART
4"-24" ECCENTRIC PLUG VALVE OPERATION ORIENTATION
OPTION
3"-24" ECCENTRIC PLUG VALVE ACCESSORIES - REMOTE
EQUIPMENT
ECCENTRIC PLUG VALVE SPECIFICATIONS
Size Range |
3" - 24" |
|
Size Range |
Water Working Pressure psi |
Hydrostatic Test psi |
3" - 12" |
175 |
350 |
14" - 24" |
150 |
300 |
| Available End Connections & Size Range | Figure No. |
|
Flanged M.J. Grooved |
3" - 24" 3" - 24" 3" - 16" |
F-5412 F-5413 F-5414 |
| Accessories | ||
Floorstands Extension Stems Extended Bonnets 2" Sq. Operating Nuts Handwheels Lever Wrench Head (3"-8") Chainwheels Worm Gear Actuators |
Electric Motor Actuators Cylinder Actuators Limit Switches Stem Guides Floor Boxes "T" Handles Chainlevers (3"-8) |
|
* Note: Call Factory For Special Applications Valves 3" through 8" are available with lever actuators. Geared actuators are recommended on 6" and larger valves. It is also recommended that valves installed in pipelines with high velocity or where water hammer conditions can be caused by sudden valve shut-off that geared actuators be installed. Lever actuators can only be used for pressure ratings of 100 psi maximum and 25 psi in the reverse flow condition. |
||
 |
 |
 |
 |
 |
 |