 |
 |
|
| TECHNICAL INFO | ||
|
|
|
| TECHNICAL INFO | ||
ECCENTRIC PLUG VALVES
| Size Range | 3" - 24" | |
|---|---|---|
Size Range |
Water working Pressure psi |
Hydrostatic Test psi |
3" - 12" |
175 |
350 |
14" - 24" |
150 |
300 |
| Available End Connections & Size Range | Figure | |
| Flanged | 3" - 24" | F-5412 |
| M.J. | 3" - 24" | F-5413 |
| Grooved | 3" - 16" | F-5414 |
| Accessories | ||
| Floorstands | Electric Motor Actuators | |
| Extension Stems | Cylinder Actuators | |
| Extended Bonnets | Limit Switches | |
2" Sq. Operating Nuts |
Stem Guides | |
| Handwheels | Floor Boxes | |
| Lever Wrench Head (3"-8") | "T" Handles | |
| Chainwheels | Chainlevers (3"-8") | |
| Worm Gear Actuators | ||
| * Note: Call Factory For Special Applications |
| Valves 3" through 8" are available with lever actuators. Geared actuators are recommended on 5" and larger valves. It is also recommended that valves installed in pipelines with high velocity or where water hammer conditions can be caused by sudden valve shut-off that geared actuators be installed. Lever actuators can only be used for pressure ratings of 100 psi maximum and 25 psi in the reverse flow condition. |
 |
 |
 |
 |
 |
 |